Circutor Computer 8d-96 Manual Official

Measures current via an external transformer and voltage directly, requiring specific phase sequence (L1, L2, L3).

Must be powered from a protected source using fuses rated between 0.5 and 2 A (type gl or M). Installation Highlights

Uses the FCP (Fast Computerized Program) system, which minimizes the number of switching operations to extend the life of the contactors and capacitors. 2. Installation and Wiring

Without the , even a simple task like changing the target cos φ can become frustrating. circutor computer 8d-96 manual

The terminals can be dangerous when the unit is powered, so installation should be completed before energizing.

LINE (L1, L2, L3) ─────────●─────────●───────── │ │ ┌┴┐ ┌┴┐ │ │CT │ │Fuse └┬┘ └┬┘ │ └─────────► Terminal 1 (Voltage Input) ▼ 5A Terminal 5 ──►(S1) Terminal 6 ──►(S2) └─────────► Terminal 2 (Voltage Input) 1. Voltage Connection

Set your desired target value (typically between 0.95 and 0.98 Inductive). Measures current via an external transformer and voltage

If you're able to find the manual, it should provide comprehensive instructions on the setup, operation, and troubleshooting of the Circutor Computer 8D-96. If not, reaching out to Circutor directly is likely your best bet.

To protect the capacitors from dangerous overcurrents caused by switching them on while still holding a residual charge, set safety delay times.

The is much more than a paper leaflet. It is the key to unlocking the device’s full potential—reducing electricity bills by optimizing power factor, avoiding low power factor penalty charges from utilities, and prolonging the life of capacitors and contactors. 2. Installation and Wiring Without the

Connect the external Current Transformer (CT) to Terminals 5 and 6 (S1 and S2).

: Allows users to review current configuration settings without altering them. Mode 3 (Programming)

Requires an external current transformer (CT) with a 5A secondary. The CT must be placed on the phase not used for voltage measurement (e.g., L1).

: The second and subsequent steps are double the size of the first step.

: A section dedicated to common issues, error messages, and troubleshooting steps to help users resolve problems efficiently.