Fix: Fagor Fi-80 Dishwasher Manual

Ensure the wash tank thermometer displays at least 150°F before washing. Clogged spray jets Remove wash arms and clear debris out of all nozzles. Insufficient detergent

The lower spray arm often gets clogged with glass shards or seeds.

This model features a pump that builds pressure gradually, preventing delicate glassware from clanking and breaking during the initial blast. 🛠️ Maintenance & Troubleshooting

Set the selector switch to the preparation/fill position. Wait for the machine to reach its operating temperatures (minimum for the tank and for the booster/rinse).

Pre-scrap dishes and place them in the basket. Raise the hood, slide the basket in, and lower the hood to start the cycle. fagor fi-80 dishwasher manual

Clean the exterior with a stainless steel cleaner. 6. Troubleshooting (Fagor FI-80)

Choose from 90s, 120s, or 180s wash cycles. Close the hood to start. Unloading:

To keep your Fagor FI-80 running like new, follow this maintenance schedule exactly as outlined in the original manual:

Call a certified technician to inspect the control board fuses. Tripped safety thermostat Ensure the wash tank thermometer displays at least

User manuals can often be downloaded from sites like ManyManuals .

Check the plastic and stainless nozzles for hard water scale or food debris. Clean them out using a paperclip or a small pick.

The machine will not fill or start if the door safety switch is open.

Look for the clear or colored lines at the back of the machine: usually denotes the rinse aid line, while Blue/Dull denotes detergent. 3. Control Panel and Operation Instructions This model features a pump that builds pressure

The water must get very hot before you wash dishes.

The Fagor FI-80 is designed for simplicity. It features an intuitive control panel that allows for rapid operation in high-volume settings. Preparing the Machine Ensure the tank filter is clean and properly positioned.

Flush the inside of the arms with warm water before reinstalling them. Deliming (Monthly or As Needed) If white mineral scales form on the interior surfaces:

Yes. The FI-80 was sold in English-speaking markets (UK, Ireland, Australia, and North America). Search specifically for "Fagor FI-80 instruction manual English PDF." The part number for the manual is often printed inside the door panel: Ref. FI80-MAN-EN-2010 .

To prime the lines after changing chemical buckets, look for the manual priming toggle switches located on the internal control panel wrapper. 4. Maintenance and Cleaning Schedule