We've redesigned, updated, rerouted and regrouped the library for better discoverability and a better flow. You can visit the new documentation here.

Inspect ball joints, tie-rod ends, control arm bushings, and wheel bearings for excessive play. Replace worn components before aligning.

The system will fire the IR beams across the fixed geometry of the jig. The software calculates the sensor deviations and rewrites the internal calibration coefficients.

According to the official , installation is critical for accuracy.

The software walks you through vehicle selection from a massive database of over 40,000 vehicles.

Install the four wheel clamps tightly onto the rims. Ensure the clamp pins are seated evenly against the rim lip to avoid inducing runout.

Always adjust the rear thrust angle first. Correct rear Camber, then adjust rear Toe to align the thrust line with the vehicle centerline.

Runout compensation eliminates geometric errors caused by bent wheel rims or imperfectly seated clamps.

: Uses 8-sensor CCD technology for comprehensive measurement. Central Unit

Lift vibrations or direct sunlight blinding the infrared sensors.

Lock the lift at its safety teeth and retighten clamp claws. Corrupt software registry or drive error.

| Error Code | Meaning | Solution | | :--- | :--- | :--- | | | Motor spin timeout (wheel not reaching speed). | Check belt tension. Wheel may be too heavy or drag brake engaged. | | Err 2 | Vibration too high during spin. | Loose wheel, damaged tire, or bad bearings on main shaft. | | Err 4 | Dimension input out of range. | Re-measure distance/diameter/width. You may have entered 20" for a 14" rim. | | Err 7 | Measurement circuit failure. | Internal PCB issue. Check cables from the position sensor. | | Display stuck at 99 | Optical sensor dirty. | Clean the encoder disc inside the machine with compressed air. |

The EXACT 60 system typically includes a central unit and high-precision sensor heads. Sensor Technology

: Operators select the vehicle make and model from an integrated database that contains thousands of factory specifications.