Choose the version corresponding to your operating system (Windows, macOS, or Linux).
| Parameter | Specification | | :--- | :--- | | | HW-417 | | Version | v1.2 | | Operating Current | < 50mA | | Operating Temperature | -40°C to +85°C | | Connector Type | USB to 6-pin Header (VCC, GND, TXD, RXD, DTR, RTS) | | Cable Length | N/A (Board module) |
Must connect to the common ground of your target project.
Once installed, you can verify the installation the same way as in Method 1, using . You can also find the driver by searching for it on the web using its Hardware ID . To do this, in Device Manager , right-click the device, select Properties , then the Details tab, and select Hardware Ids from the dropdown. This ID is a unique identifier that can help you find the exact driver you need. hw-417-v1.2 driver
sudo apt install pigpio sudo pigpiod
Connects to the TX (Transmit) pin of your microcontroller.
Since "HW-417" does not correspond to a widely recognized mainstream commercial product (like an NVIDIA GPU or Intel Chipset), it most likely refers to a generic or a specific industrial control board commonly found in electronics kits or CNC hardware. Choose the version corresponding to your operating system
If your computer does not recognize the adapter at all, especially on Windows, the culprit is often a counterfeit FTDI chip. Several years ago, FTDI released an updated driver that deliberately "bricks" or renders non-functional certain counterfeit chips as a form of DRM.
The HW-417-V1.2 driver is implemented in C language, with a total of approximately 10,000 lines of code. The driver is designed to be compatible with various operating systems, including Linux, Windows, and FreeRTOS.
Dual-voltage logic support for 3.3V and 5.5V systems (controlled via an on-board jumper toggle) You can also find the driver by searching
: Modern versions (Big Sur and later) generally have built-in support for FTDI chips and may not require a manual download.
Finding and installing a driver for the HW-417-v1.2 is straightforward because it is a standard device. By downloading and installing the official Virtual COM Port drivers from , you equip your operating system with the necessary software to recognize and communicate with this useful tool for embedded development.