This motherboard likely supports specific generations of Intel or AMD processors, depending on the chipset. For accurate information, consulting Dell's documentation or product support pages is recommended.
Once you have verified your board's model number is GA0402 or another compatible variant, you can proceed with the comprehensive specifications below.
: Legacy standard slots for specialized industrial hardware or capture cards. Rear I/O Panel Array
(End of paper)
Common stock configurations (e.g., E8400 3.00GHz or E8600 3.33GHz). Intel Pentium Dual-Core: Budget-friendly computing options. Intel Celeron: Entry-level configurations. Memory (RAM) Architecture
Equipped with the , this motherboard supports a broad range of Intel's 45nm and 65nm multi-core processors. It accommodates a Front Side Bus (FSB) speed of up to 1333 MHz . Supported CPU families include:
The rear panel layout features typical corporate connectivity intended for workstation environments: dell e93839 ga0402 motherboard specs upd
Q9650, Q9550, Q8400 (ideal for modern multi-threaded budget workloads) Intel Core 2 Duo: E8400, E8500, E7500 Intel Pentium Dual-Core: E5400, E5300 Intel Celeron: For basic, low-power applications Memory & Architecture Upgrades
Replacing the hard drive with a SATA SSD is the best upgrade to significantly improve boot times and system responsiveness. Common Replacement Parts
series. It is a Micro-ATX board built around the Intel Q45 Express chipset, designed for reliable office performance during the late 2000s and early 2010s. Core Technical Specifications Socket Type: (Socket T). Q45 Express with ICH10DO. Form Factor: (approximately 9.6 x 9.6 inches). Memory (RAM): DDR3 SDRAM (Non-ECC). 4 DIMM slots. Supports up to : Legacy standard slots for specialized industrial hardware
Install a (Solid State Drive) as your boot drive. This is the single most impactful upgrade you can make. A cheap 240GB or 480GB SATA SSD will make the system feel like new.
Since this board is proprietary (often found in models), this post focuses on the critical specs, limitations, and upgrade paths.
: The power button light provides critical feedback. Blinking amber typically indicates a problem with the system board, while solid amber suggests the board is unable to initialize. Intel Celeron: Entry-level configurations
: 4 x 240-pin DIMM slots supporting dual-channel mode. Memory Type : DDR3 Non-ECC Unbuffered SDRAM.
: Low-power entry tier processors operating at an 800 MHz FSB ceiling. Memory (RAM) Specifications and Configurations
This motherboard likely supports specific generations of Intel or AMD processors, depending on the chipset. For accurate information, consulting Dell's documentation or product support pages is recommended.
Once you have verified your board's model number is GA0402 or another compatible variant, you can proceed with the comprehensive specifications below.
: Legacy standard slots for specialized industrial hardware or capture cards. Rear I/O Panel Array
(End of paper)
Common stock configurations (e.g., E8400 3.00GHz or E8600 3.33GHz). Intel Pentium Dual-Core: Budget-friendly computing options. Intel Celeron: Entry-level configurations. Memory (RAM) Architecture
Equipped with the , this motherboard supports a broad range of Intel's 45nm and 65nm multi-core processors. It accommodates a Front Side Bus (FSB) speed of up to 1333 MHz . Supported CPU families include:
The rear panel layout features typical corporate connectivity intended for workstation environments:
Q9650, Q9550, Q8400 (ideal for modern multi-threaded budget workloads) Intel Core 2 Duo: E8400, E8500, E7500 Intel Pentium Dual-Core: E5400, E5300 Intel Celeron: For basic, low-power applications Memory & Architecture Upgrades
Replacing the hard drive with a SATA SSD is the best upgrade to significantly improve boot times and system responsiveness. Common Replacement Parts
series. It is a Micro-ATX board built around the Intel Q45 Express chipset, designed for reliable office performance during the late 2000s and early 2010s. Core Technical Specifications Socket Type: (Socket T). Q45 Express with ICH10DO. Form Factor: (approximately 9.6 x 9.6 inches). Memory (RAM): DDR3 SDRAM (Non-ECC). 4 DIMM slots. Supports up to
Install a (Solid State Drive) as your boot drive. This is the single most impactful upgrade you can make. A cheap 240GB or 480GB SATA SSD will make the system feel like new.
Since this board is proprietary (often found in models), this post focuses on the critical specs, limitations, and upgrade paths.
: The power button light provides critical feedback. Blinking amber typically indicates a problem with the system board, while solid amber suggests the board is unable to initialize.
: 4 x 240-pin DIMM slots supporting dual-channel mode. Memory Type : DDR3 Non-ECC Unbuffered SDRAM.
: Low-power entry tier processors operating at an 800 MHz FSB ceiling. Memory (RAM) Specifications and Configurations
Login with Google