network A/V receiver using either a (Internet) connection or a USB storage device . The latest firmware updates for this model typically include fixes for Tidal playback, improved TuneIn Radio reception, and general stability enhancements . Preparation Checklist
These generally indicate a network interruption or corrupted file read.
Press on the front panel (or Receiver > Home on the remote). Navigate to 8. Misc -> F/W Update -> Update via USB .
You have two primary ways to update your receiver. While a network update is convenient, many enthusiasts—and even itself—often recommend the USB method for its reliability. Method 1: The Reliable USB Route Onkyo HT-R695 Network A/V Receiver Firmware 1.28 onkyo ht-r695 firmware update
| Problem | Likely Fix | | :--- | :--- | | “USB Not Supported” | Reformat drive to FAT32. Try a smaller USB (8GB or less). | | Network update fails at 99% | Poor Ethernet connection. Reboot router and try USB method instead. | | Receiver turns off mid-update | Power outage? This is serious. Contact Onkyo support. Do not reboot manually. | | No change after update | Perform a : Hold down CBL/SAT + Standby until “Clear” appears. |
audio was incorrectly converted to AAC format during playback. Streaming Stability : Improvements were made to the TuneIn Radio reception and logo display for certain stations. TIDAL Security : The login method for was updated to enhance security. General Connectivity
Ensure the USB drive is formatted correctly (FAT32) and that the firmware files are not inside a subfolder. network A/V receiver using either a (Internet) connection
Failing to update your receiver's software can lead to system instabilities and missed features.
This is the easiest way to update if your receiver is connected to the internet.
: The display will show "Completed!" when finished. Press ON/STANDBY on the unit to enter standby mode. Press on the front panel (or Receiver > Home on the remote)
As of the most recent significant cycle (late 2021/early 2022), the latest firmware number for the (often bundled with the HT-S7800 system) is 2170-6050-7100-0011 . Key Milestone Updates
Insert the USB drive into the receiver's front or rear port.
If your receiver is not connected to the internet, you can use a USB flash drive.
Before updating the firmware on the Onkyo HT-R695, ensure the following: