Bushnell 3-9x40eg Manual -

The 3-9x40eg remains a workhorse scope. It is not a $2,000 Nightforce, but with proper care—as outlined in its manual—it will reliably take game from the whitetail woods to the western prairies for decades. Treat the optic well, refer to the manual for specs, and it will deliver consistent performance shot after shot.

Top dial used for adjusting the vertical impact point (Up/Down).

Set your scope to its maximum magnification (9x). Place the scope loosely in the bottom ring cradles. Assume your natural shooting position. Slide the scope forward or backward until you see a full, crisp picture through the eyepiece without any black shading around the edges (vignetting). This distance—usually 3 to 3.5 inches from your eye—is your eye relief. 3. Level the Reticle

Before mounting, adjust the scope to your specific eyesight: Bushnell 3-9x40 Sniper Scope Review bushnell 3-9x40eg manual

Unscrew the top cap of the illumination dial. Insert one CR2032 3V lithium coin battery with the positive (+) side facing up. Replace the cap firmly.

Source:

Indicated by the "G" markings. Turn the dial to select levels 1 (dimmest) through 5 (brightest). Green is highly visible during twilight hours. The 3-9x40eg remains a workhorse scope

1/4 MOA (approximately 1/4 inch at 100 yards) per click for windage and elevation. Weight: Approximately 442g to 550g.

The "E" stands for an illuminated reticle. Instead of a standard black crosshair, this scope features an internal battery-powered LED that lights up the reticle.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Top dial used for adjusting the vertical impact

The lens closest to your eye. It features a fast-focus diopter ring to sharpen the reticle.

Nitrogen-filled, waterproof, fogproof, and shockproof aluminum alloy. Operating Instructions How To Sight In Your Rifle Scope

If you'd like, I can to other popular Bushnell models, or walk you through the steps to calculate the exact bullet drop at different distances. Which would be more useful? Share public link

Attach the lower half of the scope rings to the bases. Place the Scope: Lay the scope in the rings.