| Specification | Detail | | :--- | :--- | | Model Number | 8liech-sc-ssd | | Product Type | Bottom-Loading Water Cooler / Dispenser | | Dimensions (HxWxD) | 39.5 x 12.5 x 14.5 inches (approx) | | Weight (Empty) | 24 lbs | | Hot Water Capacity | 1.2 Liters (pre-heated tank) | | Cold Water Capacity | 2.5 Liters (chilled tank) | | Cooling Type | Compressor-based (not thermoelectric) | | Heating Power | 500 Watts | | Cooling Power | 85 Watts | | Material | Stainless Steel (SSD), ABS plastic, Copper coils |
Use only purified or bottled water. The unit is designed for 3, 5, or 5.2-gallon bottles. 2. Product Features and Specifications Model: 8liech-sc-ssd (Full Stainless Self-Cleaning) Type: Bottom-Loading
The efficacy of a water dispenser is heavily dependent on its installation. The Viva manual provides a step-by-step guide that demystifies the setup process for the 8LIECH-SC-SSD model. This section is particularly valuable for the "first-time user" demographic. It details the placement of the unit, the loading of the water bottle (or connection to a direct water line, depending on the specific configuration), and the vital "flushing" process. The manual instructs the user to drain the first few tanks of water to remove any manufacturing residues or air pockets. This procedure highlights the manual’s role in quality control; without these instructions, a user might consume water that does not meet the manufacturer's standards of purity, leading to dissatisfaction and potential health concerns. viva water dispenser manual 8liech-sc-ssd
Adjust the probe to its maximum length and insert it into the bottle. Slide the bottle into the cabinet and close the door.
Check if the unit is plugged in, the green switch is on, and if it has been on for at least 1 hour. | Specification | Detail | | :--- |
This article serves as a comprehensive guide, incorporating key operational and maintenance instructions typically found in the official . 1. Introduction to Viva 8LIECH-SC-SSD
: Activate the red switch at the back. It takes approximately 15–20 minutes for water to heat up. It details the placement of the unit, the
: Before first use, it is recommended to drain approximately 2 gallons of water through the system to ensure cleanliness. 2. Operation USER MANUAL
: Activate the blue switch at the back. Optimum performance is typically reached at 42°F (5.5°C) .