Now boasting a 100% brighter screen, increased processing power, and faster graphics engine, the Tiger Touch II is the most specified Titan console.
The Avolites Tiger Touch II represents the perfect combination of power and portability. This third-generation console is packed with enough power for complex shows, yet small and light enough to fly in standard hold luggage. The console features SMPTE timecode support and a redesigned button layout to match the entire Titan range.
In order to update the console to version 12 of the Titan, it will be necessary to purchase and install a USB dongle called AVOKEY.
Serial 02006 - 03065
You need to order:
- AVOKEYINT
- 1x5 way to USB-A Cable (spare part code 8000-6102)
Once you've received your AVOKEYINT and 1x5 way to USB-A Cable, you will be required to connect the USB-A Cable to the motherboard. This cable will provide an additional USB port for the AvoKey.
Click here to view the installation guide: https://www.avolites.com/Portals/0/Downloads/Manuals/AvoKey/8000-6102 TT2-2-3K AVOKEY upgrade with 1808-0028.pdf
Serial 03066 - 4020
You need to order only AVOKEYINT
Once you've received your AVOKEYINT, you will be required to connect this directly to the available (Blue) USB port inside the console (on the motherboard).
Click here to view the installation guide: https://www.avolites.com/Portals/0/Downloads/Manuals/AvoKey/8000-6101 TT2 AVOKEY no cable.pdf
Serial 04021 - 05001
You need to order only AVOKEYINT
Once you've received your AVOKEYINT, you will be required to connect this directly to the available (Red) USB port inside the console (on the motherboard).
Serial 5001 and above include a factory fitted AvoKey.
Therefore, you do not need to purchase an AvoKey.
Change the USB cable, switch to a USB 2.0 port, and verify firmware compatibility. Corrupted or missing Preloader/Flashmode drivers.
: Flashing firmware carries a risk of permanently damaging (bricking) your hardware. Always ensure you have the correct scatter file or partition table for your specific device model before proceeding. Standard Toolchain Setup for Linux and macOS - ESP32-S2
While newer versions exist (5.2.x, 5.3.x, 6.x), many advanced users and service centers stick with due to its proven reliability, especially when working with older MediaTek (MTK) chipsets like the MT65xx, MT67xx, and early MT81xx series.
– Flashing a ROM intended for a different model will almost certainly brick your phone. Verify the model number and region before downloading.
Ensure the phone is completely off. Try holding Volume Up, Volume Down, or both keys together.
Download Only: Flashes only selected partitions without modifying structural partitions like the Preloader.
Flashing firmware on smartphones and feature phones requires a dependable utility to ensure a smooth, error-free process. (frequently associated with MediaTek and various feature phone chipsets) stands out as a highly efficient software application designed for flashing stock ROMs, repairing bricked devices, and upgrading firmware.
The tool features real-time connection logging. As soon as a device is connected in boot mode, the log console outputs the detected COM port and processor ID, allowing for quick troubleshooting of driver issues. System Requirements
Navigate to your extracted Flash Tool v5.0.1 directory. Right-click on (or the primary executable application file) and select Run as Administrator . Step 3: Load the Scatter or Config File
Includes diagnostic suites to verify the physical integrity of the onboard NAND/eMMC flash memory blocks before flashing.
Everything You Need to Know About FlashTool v5.0.1: A Complete Guide
For SP Flash Tool, use reliable sites like spflashtools.com or look for the file named SP_Flash_Tool_v5.1352.01.zip – note that the exact “5.0.1” label may appear as part of a larger build number.
Change the USB cable, switch to a USB 2.0 port, and verify firmware compatibility. Corrupted or missing Preloader/Flashmode drivers.
: Flashing firmware carries a risk of permanently damaging (bricking) your hardware. Always ensure you have the correct scatter file or partition table for your specific device model before proceeding. Standard Toolchain Setup for Linux and macOS - ESP32-S2
While newer versions exist (5.2.x, 5.3.x, 6.x), many advanced users and service centers stick with due to its proven reliability, especially when working with older MediaTek (MTK) chipsets like the MT65xx, MT67xx, and early MT81xx series.
– Flashing a ROM intended for a different model will almost certainly brick your phone. Verify the model number and region before downloading.
Ensure the phone is completely off. Try holding Volume Up, Volume Down, or both keys together.
Download Only: Flashes only selected partitions without modifying structural partitions like the Preloader.
Flashing firmware on smartphones and feature phones requires a dependable utility to ensure a smooth, error-free process. (frequently associated with MediaTek and various feature phone chipsets) stands out as a highly efficient software application designed for flashing stock ROMs, repairing bricked devices, and upgrading firmware.
The tool features real-time connection logging. As soon as a device is connected in boot mode, the log console outputs the detected COM port and processor ID, allowing for quick troubleshooting of driver issues. System Requirements
Navigate to your extracted Flash Tool v5.0.1 directory. Right-click on (or the primary executable application file) and select Run as Administrator . Step 3: Load the Scatter or Config File
Includes diagnostic suites to verify the physical integrity of the onboard NAND/eMMC flash memory blocks before flashing.
Everything You Need to Know About FlashTool v5.0.1: A Complete Guide
For SP Flash Tool, use reliable sites like spflashtools.com or look for the file named SP_Flash_Tool_v5.1352.01.zip – note that the exact “5.0.1” label may appear as part of a larger build number.
