Water heating accounts for up to 40% of the average household energy bill. Installing a KES Geyser Load Control Timer is one of the most effective ways to lower electricity costs by ensuring your geyser only operates when needed.
Do not exceed the maximum rated current (usually 20A or 30A resistive load).
When finished, press the button to save your changes and exit to the main display. Step 4.3: Understanding and Using the Manual Override Mode
Nina sat back. The manual wasn’t a set of instructions. It was a waiting period.
Once power is restored, the green LED should indicate mains power status, and a flashing blue LED indicates the active program. Programming & Modes kes geyser load control timer manual new
Repeat these steps by pressing again to configure programs 2 ON / 2 OFF , up to 16 separate routines if necessary.
Device mode is set to manual "ON" or "OFF" instead of "AUTO".
In the new KES models, load control periods are called zones.
Thermal cycling can cause copper wires to expand and contract. Have a professional check terminal tightness during standard home maintenance checks. Water heating accounts for up to 40% of
The "Override" or "Boost" button is a useful feature. It allows you to manually turn the geyser on for a set period (often one hour) without disrupting your main programmed schedule. For example, the ISG1201 has an override feature, but it's important to use this only when necessary as pressing it too often can cause confusion with the timer's programming and might lead to issues.
Release the button. Your current system time is now set. Step 3: Setting the On/Off Schedules
Stays OFF at all times. Use this when you want to heat water only via solar or manual override.
Isolate the mains power supply at the distribution board (DB) before starting installation. When finished, press the button to save your
It is highly recommended that a qualified electrician perform the installation to ensure safety and insurance compliance.
Mode indicator is not set to AUTO, or day groups do not match.
Slice-of-Life / Technical Drama
The timer cuts power to the geyser completely, ignoring all schedules. Use this mode when going on vacation.