If MPALL does not register your drive after clicking Update, your drive may be in a "deep brick" state. You might need to manually trigger . This involves opening the physical casing of the USB drive and short-circuiting two specific pins on the controller chip using a needle while plugging it in. This forces the controller to boot into a basic bootloader state that MPALL can recognize.
Rewrites the Burner (BN) and Firmware (FW) files directly to the controller.
This indicates that the tool failed to successfully inject the burner file into the controller's temporary memory state.
By following the identification and usage guidelines provided in this article, users can safely leverage MPALL to bring seemingly dead drives back to life, create custom bootable utilities, or simply restore a malfunctioning drive to a fully functional state. For those seeking to take full control of their USB hardware, it is an indispensable tool in the DIY repair arsenal.
For the latest versions and specific firmware files, technical forums like the Phison section on USBDev.ru are the primary resources for these tools.
Note: MPALL is a manufacturer-oriented, low-level utility. It can permanently change device firmware, erase data, or brick devices if used improperly. Only use it with clear authorization and on devices you own or are authorized to service.
Test on a sample device
When a USB drive experiences logical failure, typical Windows formatting tools cannot communicate with the hardware. MPALL bypasses the operating system's storage layer, communicates directly with the Phison controller, locks the NAND flash memory, and rewrites the firmware structure. Key Use Cases
What or code are you getting in MPALL? What is the brand and model of your USB drive?