Dvbs-evb-kd1100hd-v1.1 Latest Software [better] [ CONFIRMED × OVERVIEW ]

For owners of devices based on the DVBS-EVB-KD1100HD-V1.1 hardware, official manufacturer support has faded. However, the satellite enthusiast community continues to provide functional updates, with the firmware being the most recent and viable option as of mid-2026 .

Look for files labeled with 2023 or 2024 timestamps to ensure you are getting the most recent patch.

The main processor model and board iteration, labeled KD1100HD-V1.1 , dictate exactly which software binaries can run on the device without causing an unrecoverable system crash, known as a "brick." dvbs-evb-kd1100hd-v1.1 latest software

Copy the downloaded firmware file (e.g., DVBS-EVB-KD1100HD-V1.1_Latest.bin ) directly to the root directory of the USB drive. Do not put it inside a folder. Plug the USB into the receiver. Go to (or Software Update). Select Allcode or Firmware as the upgrade mode. Select your .bin file and press Start .

Change Log (v1.1)

Power on the receiver. Plug the USB drive into either the front or rear USB port.

In this guide, we will walk you through everything you need to know about finding, identifying, and safely installing the most recent software for this board. For owners of devices based on the DVBS-EVB-KD1100HD-V1

Check that the firmware size exactly matches your flash chip capacity (4MB or 8MB). Corrupted flash data or mid-upgrade power loss.

If you find the correct .bin file, the update is usually done via: The main processor model and board iteration, labeled

If your receiver is branded (e.g., Star-X or Neosat), check their specific support portals. Important Safety Warning Using software not explicitly designed for the

Place the DVBS-EVB-KD1100HD-V1.1_Latest.bin file in the root directory (not inside a folder). Plug and Play: Insert the USB into the receiver’s port.