Up to 40 meters per minute (model dependent).

: Feed the spent backing paper into the waste rewind mandrel, clamping it secure to ensure constant torque. Console Electronics and Programming

Align the sensor so the infrared beam passes cleanly through the gap between labels.

Route the web around the spring-loaded tension arm. This arm absorbs the shock of intermittent starts and stops. Pass the web through the label detection sensor slot. Wrap the web around the front of the peel plate.

Isolate all energy sources (electrical, pneumatic, hydraulic). Apply a personal padlock to the main circuit isolator.

A: This is often caused by incorrect label threading, an uncalibrated label sensor, or an incorrect "LABEL EDGE" parameter. Check these three areas first, and consult your manual for specific adjustment instructions.

: Compatible with tamp applicators and brush or roller adapters for different product surfaces. 4. Safety & Maintenance Password Protection

Blow out the optical gap sensor slot with compressed air to clear accumulated paper dust. Semi-Annual Maintenance Routine

Features a built-in control panel with an illuminated display and function keys, allowing operators to access internal memory for quick changeovers between stored label settings. Intelligent Speed Control:

Place the new label roll onto the unwind mandrel. Secure it firmly using the quick-locking collar.

with integrated microprocessor electronics, which eliminates external connection cables and facilitates installation in confined production spaces. 2. Technical Specifications

: Standard units typically run on 230VAC 50/60 Hz. Manual Resources