Ultra Drone X14.0 Assault Manual Jun 2026

The controller will beep or the drone's lights will turn solid, indicating it is ready for flight. 3. Flight Controls What is the 1:1 rule?

Before taking to the skies, ensure all components are present and properly configured. The X14.0 Assault is typically "Ready-to-Fly" (RTF), but some minor assembly is required for safety and performance.

For more technical troubleshooting, you can reference general setup guides for similar models like the X14W User Manual which shares core mechanical instructions with the Assault series. Ultra Drone X14.0 Assault - eBay UK ultra drone x14.0 assault manual

Always charge batteries on a non-flammable, heat-resistant surface. Never leave charging batteries unattended.

: Once both are on, push the left joystick (throttle) all the way and then all the way The controller will beep or the drone's lights

Power on the tactical controller by flipping the main toggle switch upward.

Triggers pre-programmed 360-degree flips and evasion rolls. Before taking to the skies, ensure all components

Press the Backward Trim button repeatedly until stability is achieved. Drifting Left: Press the Right Trim button repeatedly. Drifting Right: Press the Left Trim button repeatedly. 6. Advanced Combat and Assault Maneuvers

If the LEDs on the drone flash during flight, land immediately. This indicates the battery is nearly depleted.

Inspect the landing gear dampeners for degradation. Tighten any loose chassis screws using the included hex tools. Check motor bearings for smoothness.

Ensure the motors are clear of dirt, hair, or debris. 2. System Anatomy and Component Guide