Softener ((full)) - 40278 Water

To prevent the buildup of "salt bridges" (a hard crust of salt that prevents the brine from forming), only fill the salt tank about two-thirds full and use high-quality evaporated salt pellets. Troubleshooting Common Issues Kenmore ® 350 Water Softener

Yes. Most systems have an internal bypass or use a reserve capacity so you have a tank of soft water available even during a regeneration cycle. You will not be without water.

This comprehensive guide covers everything you need to know about the 40278, from its core features and benefits to installation and maintenance. What is the 40278 Water Softener?

Hard water enters the resin tank. The calcium and magnesium ions adhere to microscopic plastic beads (resin), which are pre-loaded with sodium ions. The resin trades its sodium for the hardness minerals. 40278 water softener

balances a compact footprint with heavy-duty performance benchmarks. Below are the official system ratings certified to NSF/ANSI Standard 44 for structural integrity and efficiency: Specification 420P / Kenmore 420 (625.384200) Rated Grain Capacity 40,100 grains @ 15.1 lbs salt dose Resin Tank Volume 1.11 cubic feet of high-capacity ion exchange resin Maximum Water Hardness Up to 120 Grains Per Gallon (GPG) Clear Water Iron Removal Up to 10 Parts Per Million (PPM) Rated Service Flow Rate 7.7 Gallons Per Minute (GPM) Operating Pressure Limits 20 to 125 PSI Water Temperature Limits 40°F to 120°F (Cold water line use only) Physical Dimensions 48" H x 17" W x 21" D Core Engineering & Efficiency Features 1. IntelliSoft Demand Regeneration

Unlike older, primitive water softeners that regenerate on a fixed mechanical timer—wasting hundreds of pounds of salt annually—the Kenmore 40278 utilizes .

A water softener removes hardness (calcium, magnesium) but does not remove chlorine, lead, or PFAS chemicals. Louisville Water Company has excellent safety records, but old 40278 homes with lead service lines (pre-1950) should add a point-of-use RO under the kitchen sink. To prevent the buildup of "salt bridges" (a

, as "402" is a common prefix for that series of Sears water softeners.

High-grain capacity cabinets (e.g., 41,000 to 50,000-grain units).

A critical factor often overlooked is the environmental impact of traditional salt-based water softeners. The chloride salt used to regenerate the resin is discharged with the backwash water into either your septic system or the municipal sewer system. Unlike many other pollutants, chloride does not break down in the environment; it accumulates, making freshwater ecosystems increasingly salty. You will not be without water

Understanding the 40278 Water Softener: Features, Maintenance, and Replacements

: You will need a bypass valve (typically included) and compatible connectors for your specific pipe type (copper, PEX, or CPVC).

If your brine tank is flooded, the system cannot draw brine properly.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

To keep that unit running for a decade, follow this quarterly checklist: