Lovato 31 Rgam 12 User Manual _verified_ ✓

Inspect all wiring terminal screws on the back of the unit. Engine vibrations can loosen terminal screws over time; retighten them if necessary.

: Allows operators to start or stop the engine directly using the Start and Stop keys on the front panel.

The "31" often denotes a specific firmware or revision family, while "RGAM 12" refers to the model with 12A rated relay outputs for direct control of contactors or motorized circuit breakers. lovato 31 rgam 12 user manual

Run a "Test" cycle to ensure the battery is charging.

The Lovato RGAM series are microprocessor-based control units designed for generator sets (gen-sets). Inspect all wiring terminal screws on the back of the unit

Lovato 31 RGAM 12 is a microprocessor-based control unit designed for the automatic management of standby generating sets. It serves as an Automatic Mains Failure (AMF) controller, meaning it automatically starts the generator and handles the load changeover when it detects anomalies in the main power supply. Core Functionality Automatic Transfer (AMF):

High-visibility 3-digit LED display providing real-time data. The "31" often denotes a specific firmware or

Allows the operator to start and stop the engine manually.

Safety is paramount during installation. Isolate all power sources before touching any internal components or terminals.

Dedicated RS-232 serial port standard on the base model.

Never set the dial above the motor’s FLA. The relay is designed to trip at approximately 1.1× the set current after a thermal delay.