Confirm that the matches your server's static LAN IP address. Set the default iSCSI listening port to 3260 . Step 4.2: Creating and Adding Storage Disks
Inside targetcli , follow this sequence:
(specifically common for versions like 1.8 or the newer 1.97) on a Windows environment. 1. Server-Side Installation On the computer that will act as the "Storage Server": Download & Run : Download the installer from the official iSCSI Cake site and run the setup file. Service Startup
Click on the section in the left-hand navigation pane. Select Add Disk (or click the green "+" icon). Choose Disk Type: Physical Drive: Shares an existing partition directly. iscsi cake 18 install
For a Windows client to access the storage, you must configure the iSCSI Initiator: iSCSI Setup in TrueNAS and Windows 10/11
InitiatorName=iqn.1994-05.com.redhat:client1
: Define how much storage capacity the target should have. iSCSI Target : Select "New iSCSI Target". Target Name : Give it a target name (e.g., Target1 ). Confirm that the matches your server's static LAN IP address
Create a directory and a 5GB dummy file:
On the client computer, open the tool from the Control Panel. Navigate to the Discovery tab.
Unlike standard file sharing (like NAS), iSCSI works at the . This means your client computers see "raw" bits rather than just files and folders, making it much faster for high-performance needs like running databases or complex software directly over the network. Select Add Disk (or click the green "+" icon)
Now, discover the target:
If you are using iSCSI Cake to deploy secondary game drives or application volumes to existing computers with local OS drives, configure the native initiator: