Goldcut Jk Series Drivers Download [updated] Jun 2026

The driver (specifically the ) allows your computer to map the USB port to a COM port, which is required for the machine to cut. Without the correct driver, you might experience: "Device Not Recognized" errors. The plotter not showing up in your software's cut settings. Frozen or incomplete cutting jobs. 1. Where to Download Goldcut JK Series Drivers

The computer fails to recognize the cutter entirely.

Once the driver is installed, you must configure your cutting software to communicate with the device:

Under "Use an existing port," select the COM port number you noted earlier. Goldcut Jk Series Drivers Download

The installation process varies slightly depending on your operating system and the specific software you intend to use.

Once you have downloaded the driver files, follow these steps to install them on your PC:

Navigate to the official US Cutter deployment link: Download the Goldcut Software Driver ZIP Package. The driver (specifically the ) allows your computer

Use a USB 2.0 port instead of a blue USB 3.0 port.

Download the VCP (Virtual COM Port) Drivers from the official FTDI Chip website. Step 2: Install the Driver

Below are the most commonly used drivers for the Goldcut JK series plotters. These drivers are compatible with Windows XP, Vista, 7, 8, 10, and 11. Frozen or incomplete cutting jobs

Download ZIP from USCutter Support.

Download the version corresponding to your operating system (Windows 10, Windows 11, or macOS). Step 2: Download the Cutting Software Device Profiles

If Windows doesn't auto-detect it, open , right-click the "Unknown Device" (often listed under "Other Devices"), and select Update Driver .