Staples 17466 Laminator Manual [updated]

. But there was a problem—Arthur hadn't used it in years, and the manual was nowhere to be found.

Adhesive residue from pouches builds up on the internal rollers over time. Regular cleaning prevents cloudiness, spots, and future jams. Cleaning the Internal Rollers

Place the laminator on a flat, stable surface with at least 20 inches of free space behind it to allow items to pass through freely.

The machine has not reached its full operating temperature, or you are using a 5-mil pouch on a 3-mil heat setting. staples 17466 laminator manual

Routine maintenance extends the lifespan of your machine and ensures clear, bubble-free lamination results.

The is the "quiet professional" of the home office—unassuming in its white and gray frame but capable of preserving your most important documents with a 15.7 inch-per-minute speed .

Unplug the machine immediately. This indicates a potential thermal sensor failure. Continuing to run the machine could cause overheating or a fire hazard. To help me give you the best advice, could you let me know: Regular cleaning prevents cloudiness, spots, and future jams

The pouch was fed at an angle, entered open-side first, or the document was too thick.

To avoid injury or fire:

Never leave the machine unattended while turned on. Keep out of reach of children and pets. Routine maintenance extends the lifespan of your machine

The "Wait" indicator will flash during preheating. Once the green "Ready" light illuminates, the machine has reached the required temperature. 2. The Laminating Process

This comprehensive guide serves as your complete owner's manual, covering technical specifications, setup procedures, operating steps, and troubleshooting techniques. Technical Specifications

Pouch inserted open-end first, inserted crookedly, or exiting space was blocked.

Cloudy results indicate that the pouch adhesive did not fully activate. This is often caused by insufficient heat. If you are using 5-mil pouches, ensure you have selected the higher temperature setting. Also allow the machine to warm up for the full 4–5 minutes — the ready light may come on early, but waiting an extra minute can make a significant difference. If the problem persists, try increasing the temperature by approximately 5°C (9°F) after confirming your machine has a manual temperature adjustment.

If you have lost your original documentation, you can search for the manual for the similar model ST62551 on Staples .