| Usage |
python g-code_ripper-XXX.py [-g file ] or g-code_ripper-XXX.py [-g file ] |
|
-c (or --config_file) |
Configuration file to read |
|
-g (or --gcode_file) |
g-code file to read |
|
-d (or --defdir) |
Default open/save directory |
|
-h (or --help) |
print syntax help to console window. |
|
Example (Using python script with preinstalled python distribution) |
python g-code_ripper-XXX.py -g my_file.ngc |
|
Example (Using precompiled Windows executable) |
g-code_ripper-XXX.exe -g my_file.ngc |
| F1 | Open the Help dialog box. (There is nothing in the help except a reference back to the web page and my e-mail address) |
| F2 | Opens General Settings Window |
| F5 | Refresh display |
|
g-code-ripper_config.ngc or .gcoderipperrc |
When G-Code Ripper starts up the directory in which G-Code Ripper starts in is searched for a file named "g-code-ripper_config.ngc". If the file is found it is read and all of the G-Code Ripper options are set according to the settings saved in the config file. After searching for the config file in the current directory the users home directory is searched for "g-code-ripper_config.ngc" or ".gcoderipperrc" if either of these are found it will be used as the default settings. Only the first config file found is read. To create a config file with your preferred options for startup just open G-Code Ripper and change the settings to your liking and click the save button next to configuration file in the settings window. |
| G-Code Base Operations: | This section contains basic operations that are performed prior to any G-Code Operations selected below. The base operations are always applied before the additional operations. |
| Scale XY | Sets the scaling percentage for X and Y axes to be applied to the input g-code file. |
| Scale Z | Sets the scaling percentage for Z axis to be applied to the input g-code file. |
| Scale Feed | Sets the scaling percentage for feed rate to be applied to the input g-code file. |
| Rotate | Sets the angle in degrees to rotate input g-code file. |
| Origin | The origin determines the relative location of the g-code x and y zero location. The current location of the origin is displayed in the display window as a red and green lines. The red and green lines follow the RGB convention Red is the x-axis, Green in the y-axis. |
| Save G-Code File Base (Button) | This button results in saving the g-code with only the option above the button being applied (scale, rotate, origin). Any further options from below or on the right side of the image are not applied. |
| View Plane: | This section contains a variety of view plane orientations only one of the options is active at any time. |
| G-Code Operations: | In this section the additional operations that can be applied to the g-code can be selected. |
| None | No operations are performed in addition to the base operations. |
| Split | The G-Code is split along a line creating two g-code programs that can be run independently. |
| Wrap | One of the G-Code linear axes (X or Y) is mapped to a rotary axis (A or B) for machining on a cylinder. |
| Input Field | Description |
| Split X Position | X position of the splitting line. (i.e. the line on which the g-code is divided into two parts.) The X position is measured from the origin set in the base operations section. |
| Split Y Position | Y position of the splitting line. (i.e. the line on which the g-code is divided into two parts.) The Y position is measured from the origin set in the base operations section. |
| Split Angle | The angle of the splitting line. |
| Rotate Black | The rotate black setting determines whether one of the two sides of the split will be rotated by 180 degrees. Rotating 180 degrees allows the stock to be rotated 180 degrees in the machine to machine the second half. Doing this process can effectively increase size of designs that can be cut by a given machine. |
| Save G-Code File-Black (Button) | This button saves the g-code displayed as black in the canvas. |
| Save G-Code File-White (Button) | This button saves the g-code displayed as white in the canvas. |
| Plunge Feed | Because the g-code is being split additional cut starts and stops are required. During the additional starts the tool needs to plunge into the stock material. The plunge feed sets the feed rate for these new moves into the stock material. |
| Z Safe | Because the g-code is being split additional cut starts and stops are required. After one of the additional cut stops the tool needs to move to a safe position for rapid movement. The Z Safe setting sets the z position of this z location that is safe for rapid motions. |


| Input Field | Description |
| Wrap Diameter | The wrap diameter is the diameter of the cylinder which the g-code will be mapped to. |
| Y-Axis to A-Axis | Map the Y axis positions to the A-Axis |
| X-Axis to B-Axis | Map the X axis positions to the B-Axis |
| Y-Axis to B-Axis | Map the Y axis positions to the B-Axis |
| X-Axis to A-Axis | Map the X axis positions to the A-Axis |
| Feed Adjust |
How feed rates work in Mach2 and LinuxCNC (and others?):For linear motion (i.e. x,y and/or z motion):each axis moves at constant speed and all axes move from their starting positions to their end positions at the same time. For linear motion with rotation (i.e. x,y and/or z motion AND a and/or b motion): When a rotary axis is included in the movement (i.e. ther is x,y,z motion AND a or b motion) the speed is still controlled by the linear distance to be traveled in x,y,z the A,B motion has no effect on the time to complete the motion. For Rotary motion (i.e. a and/or b motion without any x,y and/or z motion): When there is no linear motion the feed rate is interpreted as a angular rate (degrees/min) Feed Adjust Settings:Feed Adjust: Scale-RotaryG-Code Ripper takes all of these scenarios into account and adjusts the feed rate accordingly to make the feed rate consistent when cutting on a cylinder. Feed Adjust: None G-Code ripper does not scale feeds in any way. (This is the same a CNCwrapper output) A note for Mach3 users: In Mach3 there is a entry (Under Settings (Alt-6)) to set the Rotation Radius using this setting will tell Mach3 how to interpret the feed rates for code mapped to a cylinder of that radius. If you use the Rotation radius you will want to select None for the Feed adjust setting in G-Code Ripper. |
| Reverse Rotary Axis | G-Code Ripper assumes that a positive linear position is always mapped to a positive angular position. If your rotary axis (A or B) is set up such that the positive linear position should be mapped to a negative angular position check this box. |
| Save G-Code File-Wrap (Button) | This button saves the wrapped g-code. |
| Stock Rounding (Button) | This button opens the Stock Rounding window. In the stock rounding window you can generate g-code for making the stock material round using a spiral cut. |

| Input Field | Description |
| Include Rapid Moves | If selected the rapid moves will be included in the exported output. |
| File Type | Select the type of file to be exported |

| Input Field | Description |
| Probe X Offset |
X distance from the tool to the probe. (if the tool is the probe this should be set to zero) |
| Probe Y Offset |
Y distance from the tool to the probe. (if the tool is the probe this should be set to zero) |
| Probe Z Offset |
Z distance from the tool to the probe. (if the tool is the probe this should be set to zero) (It is best to keep this value as close to zero as possible to prevent crashing the tool or probe) |
| Probe Z Safe |
This is the safe Z height when probing (When the probe is over the work piece). Be aware of where the tool will be when the probe is at this position to avoid cashing the tool. |
| Probe Depth |
Max Depth the probe will travel attempting to detect the work piece. If the probe travels to this position and does not detect the part an error will occur. |
| Probe Feed | The feed rate for the probe when it is lowering to detect the part. |
| X Points |
This is the number of points that form the grid of probe points in the X direction. Points that are not needed (too far from tool path) are displayed as black in the preview canvas and will not probed. |
| Y Points |
This is the number of points that form the grid of probe points in the Y direction. Points that are not needed (too far from tool path) are displayed as black in the preview canvas and will not probed. |
| Post Probe |
This is a text entry field for any G-Codes that should be executed prior to the pause between probing and cutting. (If you want to swap the probe head for the tool head you may want to raise to a specified Z height (i.e. G0Z5.0) |
| Controller | Set the CNC controller to be used. LinuxCNC and MACH3 are supported. They require different codes for probing etc. |
The male lead is rarely a traditional hero. He is often the architect of her modification or a dangerous figure who buys, rescues, or captures her. He operates with cold, calculated precision, using his immense wealth, political power, or technological dominance to keep her within his orbit. 3. The Fight for Agency and Exclusivity
Your antagonists should be more than cardboard cutouts. The original female lead, for instance, might appear sweet but have a manipulative core of her own. The political rivals should have their own compelling motivations. A well-rounded supporting cast enriches your world and provides opportunities for your protagonist to demonstrate her "diabolical" brilliance in multiple arenas.
: Generally refers to physical alterations , such as cosmetic surgery, heavy tattoos, or dramatic styling. In a behavioral context, it can mean a "modified" personality—someone who has changed their outlook to be more assertive or "cold."
No filters, no holding back—just the raw, modified reality of my world. 🕯️ The Vault: See the modifications you won’t find here.
The story of Emma and Ryan serves as a cautionary tale about the dangers of manipulation and control in relationships. It highlights the importance of autonomy, mutual respect, and the freedom to be oneself. In the end, Emma emerged not just as a survivor but as a beacon of hope for those trapped in similar situations, a reminder that it's never too late to reclaim one's life. eng diabolical modified wife she wishes to exclusive
To understand the core concepts behind this specific phrase, we have to look at the individual components and how they interact within contemporary pop culture:
Do not assume you both define cheating or loyalty the same way. Discuss boundaries regarding social media, friendships, and emotional energy.
The "diabolical" aspect suggests that these modifications, or her reaction to them, make her dangerous, manipulative, or untamable. 2. The Quest for Exclusivity
Tell me which direction you prefer, and we can map out the next steps! Share public link The male lead is rarely a traditional hero
Here is a comprehensive breakdown and a long-form introductory article based on this popular trope.
When a modified wife "wishes to be exclusive," the narrative shifts from basic relationship boundaries to extreme possessiveness. In psychological thrillers, this desire for exclusivity is often driven by distinct behavioral catalysts:
: Extremely narrow appeal; the "diabolical" nature of the plot can be off-putting for those looking for a standard romantic or lighthearted experience. or similar titles in the body modification
Reply to the first few comments with "See you on the other side" to drive traffic to your link. The political rivals should have their own compelling
How do authors build believable transitions from standard relationship dynamics to extreme ones?
The concept of the "modified wife" highlights the lengths to which individuals go to secure their relationship status. Adaptation is a survival mechanism in love, but it can take extreme forms. Physical and Aesthetic Modifications
The popularity of these specific translated narratives highlights a global interest in exploring the boundaries of traditional relationships. While real-world health depends on boundaries and balance, fiction provides a space to analyze the mechanics of obsession and the desire for absolute commitment.
Demanding open access to devices and schedules to eliminate the anxiety of the unknown. When the Quest for Monogamy Becomes Intense
In darker, more psychological thrillers, the modification could be mental, where she has been subjected to experiments, changing her personality and desires [1].
Click the link in my bio to join the exclusive family. Let’s get diabolical. ⬇️