Fanuc Parameter 1860 Info

(Related search suggestions available.)

To understand 1860, you must first understand the two-phase homing sequence on a FANUC control:

| Phase | Speed Control | Parameter | Description | |-------|---------------|-----------|-------------| | | Rapid traverse (G00) | 1420, 1421, 1422, 1423 | Axis moves toward the deceleration dog at rapid speed. | | 2. Low-Speed Search | Parameter 1860 | PRM 1860 | After hitting the dog, axis decelerates to this speed to find the 1-grid signal (encoder marker pulse). | | 3. Final Stop | N/A (control logic) | N/A | Axis stops at exact reference position (grid point). |

Maintain a log of all parameter changes, including: fanuc parameter 1860

Operators may encounter reference return alarms such as (reference return incomplete). If this occurs, verify that all steps were followed in the correct sequence, check for mechanical issues affecting the axis movement, confirm that the chosen homing method is appropriate for the machine configuration, and ensure that no other parameters affecting reference return have been inadvertently changed.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Never assume Parameter 1860 means the same thing on every FANUC control. Always reference the correct parameter manual for your specific CNC model. (Related search suggestions available

Home the absolute axis using the appropriate method for your machine:

During a linear move, an axis moves smoothly under the control of the position and velocity loops. However, when an axis changes direction (e.g., from positive X to negative X), it must come to a stop and accelerate in the opposite direction.

In the world of FANUC CNC systems, is a critical setting used primarily for machines equipped with absolute position detectors . It stores the current position of each axis relative to the machine zero point, ensuring the CNC "remembers" where it is even after a power cycle. What is FANUC Parameter 1860? If this occurs, verify that all steps were

Optimize 1860 for speed without sacrificing repeatability.

Turn the main CNC machine power completely OFF, wait 10 seconds, and turn it back ON.

2-word (often works in conjunction with high-order bits in nearby parameters).