Icom Ic-f310 Programming Software Jun 2026

The IC-F310 is a 32-channel radio (depending on the version). In the main spreadsheet view, you can enter:

This guide provides a detailed overview of the software, required hardware, and the programming process for the IC-F310/F410 series. 1. Overview of the Icom CS-F300 Programming Software

Q: Can I use the software to program other Icom radios? A: No, the software is specifically designed for the IC-F310 radio.

If you need assistance finding specific software versions, mapping COM ports, or diagnosing a connection issue, let me know what you are using and the exact error message you are seeing! Share public link

Revision 1.2 is a common standard, though Revision 2.1 is available for newer OS compatibility. Operating System: Originally designed for Icom Ic-f310 Programming Software

Navigate to the menu to define what the buttons on the radio do. You can set up keys for: SCAN: Toggle scanning on/off. MONI: Temporarily disable squelch. BANK: Switch between different channel groups. 6. Writing to the Radio

A frequently overlooked prerequisite is radio power. The radio must be with a fully charged battery (for portable units) before attempting any programming operation. A low battery during the cloning process can cause communication errors or data corruption.

According to ameradio.com , this software is a DOS-based application essential for full control over the radio's specialized features. 2. Necessary Hardware for Programming

What (Windows 11, Mac, Linux) you are using. The exact model number or channel capacity of your radio. Any specific error messages you are seeing. The IC-F310 is a 32-channel radio (depending on the version)

Assign alphanumeric names to channels for easier identification if your specific hardware configuration supports display text. Step 4: Writing the New Data to the Radio

Ensure you are using the correct software version designed specifically for the IC-F310/F410 series, not the newer IC-F3000 series.

The radio features an 8-pin modular connector for the microphone, which is also used for programming. A USB-to-8-pin programming cable is typically required for modern laptops.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Overview of the Icom CS-F300 Programming Software Q:

Programming the IC-F310 involves preparing your PC and ensuring the radio is correctly connected.

Set up your CTCSS or DTCS tones for repeater access or private lines.

Place your CS-F300 software files in a dedicated folder (e.g., C:\Icom ). Mount this folder in DOSBox.