Solar Camera Yn88-wifi Manual -

To avoid false alarms from small animals or moving leaves, you can adjust the PIR motion sensor in the app. You'll find a setting (often called "PIR Sensitivity" or "Detection Sensitivity") that you can set to "Low," "Medium," or "High." Experiment with these levels after installation to find the setting that works best for your environment.

: Ensure the app has "automatic starting" and "notification" permissions enabled in your phone's system settings. Offline Status

cat /proc/pir_status

| Mode | Battery Use | Best For | | :--- | :--- | :--- | | | 4-5 Days | Driveways, busy yards | | Motion Alert (Medium) | 7-10 Days | Normal home security | | Motion Alert (Low) | 20+ Days | Observing wildlife, low traffic | | Continuous Record | <12 Hours | Not recommended on solar |

With the camera mounted and connected, Elias fine-tuned the settings through the app: PIR Motion Detection: solar camera yn88-wifi manual

The camera interfaces with your smartphone via a dedicated mobile app (typically , Tuya Smart , or i-Cam+ depending on the specific firmware version distributed with your YN88 variant. Check your box QR code to verify). The configuration process follows standard P2P Wi-Fi protocols.

The YN88-WIFI offers a reliable, "set and forget" security experience once configured. By using the UBell app and ensuring a strong 2.4GHz signal, you can monitor your property from anywhere in the world. To avoid false alarms from small animals or

The camera's is a key feature for power management. When it detects the heat of a person or large animal within its range (1-10 meters), it triggers the camera to start recording and can send an immediate notification to your phone. Between detections, the camera enters a low-power standby mode, significantly extending the battery's life.