Epson Resetter Tool L380 !!link!! Jun 2026

To reset your printer, you generally need a Windows-based PC and a direct USB connection to the Epson L380.

Open the AdjProg.exe file (or equivalent).

Connect the printer directly to your Windows PC using a USB cable (do not use Wi-Fi). Turn the printer ON.

The blinking red light error should now be completely gone, and your computer status monitor will show the printer as ready for regular operation. Important Precautions and Maintenance Tips epson resetter tool l380

🛑 The software only resets the digital counter . It does not clean the physical sponges . If you reset the counter multiple times without physically replacing or washing the waste ink pads, wet ink will eventually overflow out of the bottom of the printer and damage your desk or the machine's internal circuitry.

Ensure you are using the USB cable (not Wi-Fi) and that no other print jobs are in the queue.

In the main menu, click on the button.

Note: Before you begin, ensure your printer is connected to your Windows PC via a USB cable. The adjustment program requires a direct, wired connection. Step 1: Prepare Your Computer

Check the box for and click Check to see the current usage.

Turn the printer back on. The error should now be gone. Crucial Tips and Warnings To reset your printer, you generally need a

If you continue to reset the counter repeatedly without addressing the physical ink pads, the pads will eventually become completely saturated. When this happens, excess ink will leak out of the bottom of the printer, which can: Damage delicate inner gears and rollers. Spill onto your desk, carpet, or important documents. Cause short circuits on the motherboard.

Suddenly, the red lights stop blinking. The printer "wakes up" and realizes it isn't dead after all. It’s a satisfying moment of fixing something yourself rather than throwing it away. A Word of Caution

Before using any resetter tool, ensure you have the following: Turn the printer ON

Reach over to your physical printer and press the button to turn it completely off. Click OK on the computer screen prompt. Wait 10 seconds, then turn your printer back on.