Disco 240 Dmx Controller Manual Jun 2026

Displays channel values, scene numbers, and menu options.

The console runs through programmed scenes or chases automatically at a set speed.

Press Auto/Del and adjust speed/fade sliders to run pre-programmed chases. 6. Troubleshooting

Press the Scene button (1–8) and the Bank button (Up/Down) where you want to store it. All LEDs will flash, indicating the scene is saved. 5. Creating Chases (Sequences) A Chase is a sequence of scenes played back-to-back. Enter Program Mode. Select a Chase: Press one of the 12 Chase buttons . disco 240 dmx controller manual

Hold down the Program button for 3 seconds.

Shows the current bank, scene, DMX value, or percentage. 2. Proper DMX Cabling and Setup

With this knowledge, you are fully equipped to configure, program, and operate your Disco 240 controller to its maximum potential. Could you let me know: Displays channel values, scene numbers, and menu options

Release the buttons once the LEDs flash wildly. The memory is now completely cleared. 7. Troubleshooting and FAQ Why are my fixtures not responding to the faders?

: Select your desired bank using the Bank Up/Down buttons, then manually press Scene buttons 1–8 to change your room aesthetic instantly. Auto Mode (Speed & Fade Controlled)

Set your fixtures to the correct starting address. Generally, Fixture 1 should be A001cap A 001 , Fixture 2 should be A021cap A 021 channels), and so on. 4. Programming Guide: Creating Your Show allows you to create custom scenes and chases. A. Recording a Scene Press Program for 3 seconds until the indicator flashes. Select the Scanner/Fixture (e.g., button 1). Use the Faders to set the desired colors and positions. Press the MIDI/Add button. Select a Bank ( ) and a Scene button ( ) to save. B. Creating a Chase (Automatic Movement) Enter Program mode. Select a Chase button ( Select a Bank that contains the scenes you want to use. Press Scene Button 1 , then MIDI/Add . then MIDI/Add .

Adjust the speed and transition time of chases.

Before using the Disco 240, ensure that you have a basic understanding of DMX protocol and lighting control principles. To set up the device, follow these steps:

Congratulations on purchasing the Disco 240 DMX Controller, a professional-grade lighting controller designed to make your lighting design and operation a breeze. This manual will guide you through the features, installation, and operation of your new Disco 240 DMX Controller.

As you move the sliders, your lights should respond in real-time. If they don't, ensure your DMX cables are "daisy-chained" correctly and the "Blackout" LED is not flashing. 4. Programming Scenes A "Scene" is a snapshot of your lights' current state.