, a dedicated driver is available to enable full functionality and RAID management, as the OS installation media does not include these drivers natively. Hewlett Packard Enterprise Driver Details & Support Support Status: Windows Server 2022 is fully supported. Key Version: 1010.14.0.0(C)
There are two primary methods for deploying the driver: Automated (via Intelligent Provisioning) and Manual (Driver Injection).
Requires UEFI Boot Mode ; it does not support Legacy BIOS.
HPE Smart Array S100i SR Gen10 driver is fully supported on Windows Server 2022
Because Windows Server installation media does not include the native S100i driver, you must load it manually during the OS setup.
Complete Guide to HPE Smart Array S100i SR Gen10 Drivers for Windows Server 2022
HPE Smart Array S100i SR Gen10 SW RAID Driver for Windows Server 2022
By following the steps and best practices outlined in this guide, you can successfully deploy and manage the HPE Smart Array S100i SR Gen10 controller on Windows Server 2022.
⚠️ This is not an HPE-supported configuration. Use this for lab, homelab, or non-production environments only. For production, buy a hardware RAID controller (e.g., P408i-a).
The driver will inject, and your logical drive should instantly appear. Proceed with normal installation.
| Version | Windows Server | Status | Notes | |---------|----------------|--------|-------| | 1010.14.0.0 | 2022 | Recommended | Initial Windows Server 2022 support | | 106.12.6.0 | 2016, 2019 | Critical update | Addresses potential data inconsistency during RAID creation/operation; RAID 0 and single‑drive RAID 1 are not affected | | 106.12.6.0(D) | 2019 / loads on 2022 | – | Confirmed to load on Windows Server 2022 despite being packaged for Server 2019 |
Default: Small
Small 1
Small 2
Medium
Medium 1
Medium 2
Large
Large 1
Large 2
Large 3