What are you running on your computer?
Automatically populates current satellite frequencies and symbols.
Follow these steps precisely to ensure a successful software flash. Step 1: Install Drivers and Identify the COM Port Plug your USB-to-RS232 adapter into your PC. Install the necessary drivers for the adapter. Open on your Windows computer. Expand the Ports (COM & LPT) section. satlink ws-6906 software upgrade
The official method using the device's USB port, which is straightforward when the original USB cable is available.
Turn the Satlink meter off, click "Start" on the tool first, and then flip the meter's power switch on. What are you running on your computer
: A USB-to-RS232 serial adapter if your PC lacks a native COM port.
Set the option to match the COM port number discovered in Device Manager. Configure the communication parameters exactly as follows: Bits per second (Baud Rate) : 115200 Parity : Even Data Bits : 8 Stop Bits : 1 Step 1: Install Drivers and Identify the COM
Satlink manufactured several motherboard revisions of the WS-6906 over its production lifespan. Loading a firmware file meant for a different board revision will permanently corrupt the flash memory. Turn on your Satlink WS-6906. Press the button. Navigate to System Setup or Tools . Select Information . Note down the Hardware Version , Software Version , and Date . Match your download file precisely to this information. Step 2: Set Up the COM Port Connection
Wait about 2 minutes. The device will automatically restart once the record is successful. Method 2: USB Upgrade (Internal Menu)
Allow the progress bar to complete. The meter may restart automatically during this process.