Novastar V760 Manual

5 types of input interfaces including 1x CVBS, 1x VGA, 1x DVI, 1x HDMI 1.3, and 1x USB playback. LED Out: Dual-channel network port (Gigabit Ethernet). Video Processing: Supports 10-bit/8-bit video input. Control Method: USB, Serial Control (RS232).

Navigate back to the main menu and select -> Quick Config .

Supports saving and calling 6 user scenarios/templates. 2. Input Interfaces Go to product viewer dialog for this item. supports five standard high-definition input types: HDMI 1.3: ×1 DVI: ×1 VGA: ×1 USB: ×1 (supports direct USB playback) CVBS: ×1

I can provide custom calculation steps or targeted software settings. Share public link

The NovaStar V760 is a highly reliable, simple-to-use 2-in-1 video controller designed for LED display applications. Combining a powerful video processor with an integrated sending card, it simplifies the hardware setup required to run commercial LED screens, stage backdrops, and retail displays. novastar v760 manual

is built for efficiency, handling a moderate load with diverse input options:

Enter the exact pixel width and height of a single cabinet ().

Click and drag with your mouse to map the exact physical path of the Ethernet cable.

2x Gigabit Ethernet ports to connect directly to receiving cards. 5 types of input interfaces including 1x CVBS,

Load your videos and images into the root directory or organized folders. Insert the drive into the front port.

: Displays menus, system status, and current resolution settings.

If utilizing , switch the port selection and map out the remaining cabinets.

Turn on the button for automatic fitting, or manually match the canvas dimensions in the Layer Settings menu. Random Cabinets Flickering or Off Control Method: USB, Serial Control (RS232)

When you power the unit, the LCD cycles through:

Connect the V760 to your computer via USB (for configuration) and DVI/HDMI (for video signal). Power on the V760. 3.2 Screen Configuration in NovaLCT According to, follow these steps: Open and connect to the V760. Navigate to "Screen Configuration" . Choose the communication port (e.g., COM3).

: Allows operators to switch between input sources instantly using front-panel buttons. Three Scaling Modes

Adjust the and X/Y Coordinates to reposition and scale the sub-window to your exact preference. USB Direct Media Playback

Navigate back to the main menu and select > Quick Configuration .