Control Ncstudio V55601 English Setup Work 【99% NEWEST】

Go to File -> Open and Load... and select your prepared G-code file ( .nc , .txt , or .tap ).

Review the toolpath simulation in the built-in display window to verify the boundaries.

It is highly recommended to use a dedicated computer stripped of background applications to prevent data transmission stuttering. 2. Step-by-Step Ncstudio V5.5.601 English Installation

Let me know if you need screenshots of the I/O pin mapping or the pulse calculation formula. control ncstudio v55601 english setup work

Insert the Ncstudio PCI control card firmly into an available PCI slot. Secure the card bracket to the chassis using a screw. Close the case, reconnect the power, and boot the computer. Step 2: Running the Software Setup

Shut down the computer completely and unplug the power cable. Open the computer chassis to expose the motherboard. Locate an empty, white .

Check Parameters -> Manufactory -> Limit Settings and ensure that "Limit Enable" is correctly configured to match your machine's limit switch type (NC or NO). Go to File -> Open and Load

Navigate to the coordinate display block at the top of the NCStudio interface.

The temporary coordinate system centered around your raw material. Step-by-Step Work Setup

: Once the software installation finishes, shut down the computer . Insert the PCI control card into an available PCI slot and secure it with screws. It is highly recommended to use a dedicated

Select your G-code file (supported extensions include .nc , .txt , .tap , and .cnc ).

Shut down the PC, remove the PCI card, clean the gold contacts with a rubber eraser, and re-seat it firmly into a different PCI slot. Ensure you are using a 32-bit operating system. 2. "Limit Switch Triggered" / Hard Limit Error

Click the , Clear Y , and Clear Z buttons individually. Your "Current Coordinates" will change to 0.000, 0.000, 0.000 . Loading and Executing G-code

Locate an available PCI slot (usually white or blue, longer slots). Remove the metal slot cover on the back of the case.

Select and click Next. Check the box for Include this location in the search .