Bnd-50 Se36 Instructions [exclusive] <95% TRUSTED>
to cycle through day combinations (e.g., individual days, weekdays, weekends, or all 7 days). to set when the device should turn on. Set Off Time again to see "1 OFF." Repeat the steps to set the turn-off time. to return to the main display. панда електроникс Operating Modes (or ON/AUTO/OFF) button to cycle through modes: : The outlet is permanently on. : The outlet is permanently off. : The timer will follow your programmed schedule.
: Each small black segment around the dial represents 15 minutes of operating time. Manual Override Switch
: Press and hold the CLOCK button. Simultaneously tap the WEEK button until the correct day indicator (e.g., Mo, Tu, We) appears on top. bnd-50 se36 instructions
Allow the unit to charge for at least 15–30 minutes for best results, though it can be programmed immediately. 2. Setting the Current Time (Clock)
For mechanical models, such as the BND-50/E11N, the schedule is set using physical pins: to cycle through day combinations (e
You can set up to 8 groups of timer programs. Each group consists of an "ON" time and an "OFF" time.
Press the "PROG" button again. The screen will display "1OFF". to return to the main display
: Press the PROG button. The screen will display " 1 ON ". Set the "ON" Time :
After programming, follow this sequence to start operation:
A: Search “BND-50 SE36 official manual PDF” on the manufacturer’s website. Do not trust third-party sites – firmware updates and full instructions are only available from the official support portal.
All parameters can be set directly on the touchscreen or remotely via a computer (Wi‑Fi enabled).